1PC used used B&R 8BVI0660HCS0.000-1 servo drive #LYQ007
1PC used used B&R 8BVI0660HCS0.000-1 servo drive #LYQ007
| Parameter | Value |
|---|---|
| General Information | |
| Product Type | ACOPOSmulti inverter module, 66 A, AS, cold plate or pass‑through mounting |
| B&R ID code | 0xBE88 |
| Dynamic node allocation (DNA) | Yes |
| Slots for plug‑in modules | 2 |
| Certifications | CE, UKCA, cULus E225616, KC, Functional safety (STO) |
| DC Bus Connection | |
| Nominal DC bus voltage | 750 VDC |
| Continuous power consumption | 48.8 kW |
| DC bus capacitance | 1980 µF |
| Power dissipation (5 kHz) | [0.03 × I<sub>M</sub>² + 7.9 × I<sub>M</sub> + 90] W |
| Power dissipation (10 kHz) | [0.11 × I<sub>M</sub>² + 11 × I<sub>M</sub> + 185] W |
| Power dissipation (20 kHz) | [0.17 × I<sub>M</sub>² + 27 × I<sub>M</sub> + 310] W |
| 24 VDC Power Supply | |
| Input voltage | 25 VDC ±1.6% |
| Input capacitance | 32.9 µF |
| Max. power consumption | 27 W + P<sub>SLOT1</sub> + P<sub>SLOT2</sub> + P<sub>24V Out</sub> + P<sub>HoldingBrake</sub> |
| 24 VDC Output | |
| Quantity | 2 |
| Output voltage (315–800 VDC bus) | 24 VDC ±6% |
| Fuse protection | 250 mA (slow‑blow) electronic, automatic reset |
| Motor Connection | |
| Quantity | 1 |
| Continuous power per motor | 48 kW |
| Continuous current (I<sub>eff</sub>) | 66 A |
| Peak current (I<sub>eff</sub>) | 132 A |
| Nominal switching frequency | 5 kHz |
| Switching frequencies | 5 / 10 / 20 kHz |
| Max. output frequency | 598 Hz |
| Max. motor cable length (5/10/20 kHz) | 25 m / 25 m / 25 m |
| Current derating (5 kHz, cold plate) | 1.9 A/K (starting at 58°C) |
| Current derating (5 kHz, pass‑through) | 1.82 A/K (starting at 40°C) |
| Current derating (10 kHz, cold plate) | 1.36 A/K (starting at 27°C) |
| Current derating (10 kHz, pass‑through) | 0.88 A/K (starting at −12°C) |
| Current derating (20 kHz, cold plate) | 0.75 A/K (starting at −37°C) |
| Current derating (20 kHz, pass‑through) | 0.54 A/K (starting at −106°C) |
| Altitude derating | 6.6 A<sub>eff</sub> per 1000 m (above 500 m) |
| Motor insulation stress | IEC TS 60034‑25:2004 Limit curve A |
| Motor Holding Brake Connection | |
| Quantity | 1 |
| Output voltage | 24 VDC +5.8% / −0% |
| Continuous current | 4.2 A |
| Max. internal resistance | 0.15 Ω |
| Extinction potential | Approx. 30 V |
| Max. extinction energy | 3 Ws per operation |
| Max. switching frequency | 0.5 Hz |
| Enable Inputs (2x) | |
| Circuit | Sink |
| Nominal input voltage | 24 VDC |
| Max. input voltage | 30 VDC |
| Input current (nominal) | ~30 mA |
| Switching threshold (Low/High) | <5 V / >15 V |
| Isolation (Input‑Module / Input‑Input) | Yes / Yes |
| Trigger Inputs (2x) | |
| Circuit | Sink |
| Nominal input voltage | 24 VDC |
| Max. input voltage | 30 VDC |
| Input current (nominal) | ~10 mA |
| Switching threshold (Low/High) | <5 V / >15 V |
| Isolation (Input‑Module / Input‑Input) | Yes / Yes |
| Switching delay (Rising/Falling) | 52 µs ±0.5 µs / 53 µs ±0.5 µs |
| Temperature Sensor Connection | |
| Quantity | 1 |
| Resistance range | 500 Ω to 5 kΩ |
| Operating Conditions | |
| Ambient temperature (operation) | 5 to 40°C (nominal), max 55°C |
| Storage temperature | −25 to 55°C |
| Transport temperature | −25 to 70°C |
| Relative humidity (operation) | 5 to 85% |
| Installation elevation | 0 to 500 m (nominal), max 4000 m |
| Pollution degree | 2 (EN 61800‑5‑1) |
| Overvoltage category | III (EN 61800‑5‑1) |
| Degree of protection | IP20 (EN 60529) |
| Mechanical Properties | |
| Dimensions (W × H × D) | 213.5 mm × 317 mm × 212 mm (cold plate) / 209 mm (pass‑through) |
| Weight | Approx. 8 kg |
| Module width | 4 |
| Electrical Properties | |
| Discharge capacitance | 0.44 µF |
| Standby losses | 10.5 W |
| Energy efficiency | IE2 (various load points) |
1 .Our company specializes in automation industrial control accessories. We have more than 100,000 products.
Including : frequency converter, servo driver, servo motor, data acquisition card, industrial camera, touch screen, circuit board, DCS module, soft starter, industrial computer,encoder... etc
2,We accept PayPal transaction. All products provided 60 days warranty. We can send the goods by fast express to all over the world.
3. We can supply the product in brand new or used condition to meet your requirement.The picture and price show on our store may not accurate, before purchasing please contact us to provide you with exactly quote and real pictures.
4. If you can not find the product which you need in our store, please contact us .we will check it for you.



