1PC for used Berger Lahr Driver TLC434 F #LYQ007
1PC for used Berger Lahr Driver TLC434 F #LYQ007
1PC for used Berger Lahr Driver TLC434 F #LYQ007
Part Number: TLD134 F; Model: TLD134 F; Product Name: Berger Lahr TLD134 F Stepper Motor Driver; Product Series: Berger Lahr TLD Series, Industrial-Grade 3-Phase Hybrid Stepper Driver
Brand: Berger Lahr (A globally recognized leader in motion control systems and stepper technology, now integrated into the Schneider Electric Group. With decades of precision engineering experience, Berger Lahr specializes in high-reliability motion solutions for automation, semiconductor, packaging, and material handling industries. The TLD134 F is a compact, high-precision 3-phase stepper driver designed to unlock the full performance of hybrid stepper motors, delivering exceptional positioning accuracy and smooth operation.)
Product Status: Industrial-Grade Original Equipment (Factory Calibrated, 100% Functional, RoHS Compliant); Product Category: 3-Phase Hybrid Stepper Motor Driver, engineered to convert digital control signals into precise motor motion, featuring multi-level step resolution and advanced current control for optimal performance.
Core Application: Exclusively compatible with 3-phase hybrid stepper motors, widely used in high-precision industrial scenarios including CNC machining centers, precision measuring instruments, semiconductor wafer handlers, medical equipment, and automated optical inspection (AOI) systems. It is particularly suitable for applications demanding ultra-low step angle, minimal vibration, and consistent performance under light to medium load conditions.
Core Features: 3-phase drive architecture for superior torque and smoothness compared to 2-phase drivers; Multi-level step resolution (up to 1/128 microstep) for ultra-high positioning accuracy; Advanced current control algorithm to reduce motor noise and heat; Comprehensive built-in protection mechanisms; RS-485 communication interface for remote configuration; Compact DIN rail-mountable design; Compliance with international industrial EMC and safety standards.
2. Core Performance Specifications (Ta = 25℃, Unless Otherwise Specified)
2.1 Electrical Performance Parameters
Power Supply Requirements: DC 24V ~ 48V (Wide Voltage Range), Rated Input Current: 2.8A (Typical), Peak Input Current: 6A (10ms Duration); Power Consumption: ≤35W (Normal Operation), ≤60W (Peak Load, Full Current Output).
Motor Output Performance: Output Current Range: 0.3A ~ 3.0A (Adjustable in 0.1A Increments); Motor Phase Resistance: 0.2Ω ~ 8Ω; Motor Phase Inductance: 2mH ~ 40mH; Step Resolution: Configurable via DIP Switch or Software, covering 1.8° (full step) down to 0.0140625° (1/128 microstep), compatible with Berger Lahr 3-phase stepper motors with adjustable step angles as low as 0.036°.
Control Signal Input: Input Signal Type: TTL Level (5V DC), Pulse/Direction Mode or CW/CCW Mode; Input Impedance: 12kΩ ~ 22kΩ; Signal Response Time: ≤0.8μs; Maximum Pulse Frequency: 250kHz (Supports High-Speed Precision Positioning).
Insulation Performance: Channel-to-Channel Isolation: 1500V AC (1 Minute); Channel-to-Ground Isolation: 2000V AC (1 Minute); Insulation Resistance: ≥100MΩ (500V DC); Dielectric Strength: 1.5kV AC for 1 Minute (Between Power Circuit and Control Circuit).
2.2 Control & Communication Parameters
Control Modes: Pulse/Direction Control, CW/CCW Control, Microstep Control, Torque Limiting Mode; Built-in Functions: Automatic Current Reduction at Standstill (Energy-Saving), Stall Detection, Overload Warning, and Motor Damping for Vibration Reduction.
Communication Interface: RS-485 Port (Half-Duplex, Optically Isolated); Communication Protocol: Modbus RTU (Configurable); Data Transmission Rate: 9600~115200 bps (Selectable via Software); Supports Remote Parameter Adjustment, Real-Time Status Monitoring, Fault Diagnosis, and Parameter Backup/Restore.
EMC Performance: ESD Protection: ±8kV (Contact), ±15kV (Air) Per IEC 61000-4-2; Surge Protection: ±1kV (Line to Ground) Per IEC 61000-4-5; EMI Filter: Built-in, Compliant with EN 61000-6-4; RFI Suppression: Meets Industrial Class B Standards for Indoor Applications.
1 .Our company specializes in automation industrial control accessories. We have more than 100,000 products.
Including : frequency converter, servo driver, servo motor, data acquisition card, industrial camera, touch screen, circuit board, DCS module, soft starter, industrial computer,encoder... etc
2，We accept PayPal transaction. All products provided 60 days warranty. We can send the goods by fast express to all over world.
3. We can supply the product in brand new or used condition to meet your requirement.The picture and price show on our store is not real, before purchasing, please contact us to provide you with accurate quotation and real pictures.
4. If you can not find the product you need in our store, please contact us .we will check it for you.