Home New Arrival NEW 2‑channel microprocessor‑controlled vibration monitor VC1100‑C11
NEW V18345-1010521001 #OYF006 Back to New Arrival NEW VBP160-Z 253-150 #OYF006

Sidebar

NEW 2‑channel microprocessor‑controlled vibration monitor VC1100‑C11

Sale price $4,500.00
40 People are viewing this right now
Add to Wishlist
Add to Compare

NEW 2‑channel microprocessor‑controlled vibration monitor VC1100‑C11
NEW 2‑channel microprocessor‑controlled vibration monitor VC1100‑C11
Sale price$4,500.00
NEW 2‑channel microprocessor‑controlled vibration monitor VC1100‑C11

NEW 2‑channel microprocessor‑controlled vibration monitor VC1100‑C11

$4,500.00
VC1100‑C11 is a 2‑channel microprocessor‑controlled vibration monitor by Brüel & Kjær Vibro, designed for bearing/rotating machinery condition monitoring, with AC 115/230 V selectable power, 100 mV/mm/s sensor sensitivity, built‑in alarm relays, analog outputs, and CE certification (EN 61326‑1 EMC, EN 61010‑1 safety)Brüel & Kjær Vibro. Below are its core English parameters and key notes.


Core Parameters (VC1100‑C11)


Category Specifications
Basic Information Model: VC1100‑C11

Type: 2‑Channel Vibration Monitor (Bearing/General Machinery)

Brand: Brüel & Kjær Vibro

Application: Rotating equipment (pumps, motors, fans, compressors) bearing/machinery vibration monitoring

Certification: CE (EN 61326‑1, EN 61010‑1), WEEE-Reg.-No. 69572330Brüel & Kjær Vibro
Power Supply Voltage: 115 V AC / 230 V AC (jumper‑selectable), +15% / -25% tolerance

Frequency: 48–400 Hz

Power Consumption: ~15 VA

Protection: 2× thermal resistors (125 °C) in primary transformer windingsBrüel & Kjær Vibro
Input Channels Channels: 2 independent vibration input channels

Sensor Type: Velocity (e.g., 100 mV/mm/s) or acceleration (accelerometer) sensors

Sensitivity: 100 mV/mm/s (standard); configurable via software

Input Range: 0–20 mm/s (RMS); 0–28.2 mm/s (zero‑to‑peak); 0–56.4 mm/s (peak‑to‑peak)Brüel & Kjær Vibro
Signal Processing Measurement Parameter: Vibration velocity (mm/s RMS) or acceleration (m/s² RMS)

Filtering: Band‑pass (10–1000 Hz) & low‑pass (500 Hz) filters

Sampling Rate: 10 kHz per channel

Update Rate: 100 ms (display/relay output); 1 s (analog output)
Outputs & Alarms Relays: 3 alarm relays (SPDT, 5 A/250 V AC), 1 OK relay (SPDT, 5 A/250 V AC)

Analog Outputs: 2× 4–20 mA (load ≤ 500 Ω); 2× buffered vibration signal outputs (0–10 V DC)

Remote I/O: RS485 (Modbus RTU) for remote monitoring/configuration
Mechanical Mounting: DIN rail (35 mm) or panel‑mount

Dimensions (approx.): 482 × 177 × 150 mm (W×H×D)

Weight: ~7 kg

Protection Class: IP20 (when installed in control cabinet)
Environmental Operating Temperature: 0 °C to +55 °C (non‑condensing)

Storage Temperature: -25 °C to +70 °C

Relative Humidity: 5–95% RH (non‑condensing)

Vibration Resistance: 1 g (10–500 Hz); Shock Resistance: 10 g (11 ms)

 

 

1  .Our company specializes in automation industrial control accessories. We have more than 100,000 products.  
 Including : frequency converter, servo driver, servo motor,   data acquisition card, industrial camera, touch screen, circuit board, DCS module, soft starter, industrial   computer,encoder... etc
2，We accept PayPal transaction. All products provided 60 days warranty. We can send the goods by fast express to all over world.
 3. We can supply the product in brand new or used condition to meet your requirement.The picture and price show on our store is not real, before purchasing, please    contact us to provide you with accurate quotation and real pictures.
4. If you can not find the product you need in our store, please contact us .we will check it for you.

You may also like

Recently viewed products