1 PCS USED LAM Control Board V7668A 605-109114-003 #LYQ007
1 PCS USED LAM Control Board V7668A 605-109114-003 #LYQ007
1 PCS USED LAM Control Board V7668A 605-109114-003 #LYQ007
Part Number: 605-109114-003; Model: V7668A; Product Name: LAM Control Board
Brand: LAM Research Corporation (Specializing in Semiconductor Manufacturing Equipment, Providing High-Precision Control Solutions for Wafer Processing Systems)
Product Status: Original Industrial-Grade Control Component (In Stock for Semiconductor Fabrication, Precision Industrial Control, and High-End Automation Projects); Product Category: High-Precision Industrial Control Board, Designed for Stable Operation in Semiconductor Manufacturing Environments.
Core Application: Specifically engineered for semiconductor wafer processing equipment, including etching, deposition, and lithography systems. It serves as a key control hub for regulating critical process parameters, enabling precise coordination between actuators, sensors, and upper-level control systems in cleanroom environments with strict stability and accuracy requirements.
Core Features: Integrated Power Regulation Circuitry for Multi-Voltage Output; High-Precision Signal Processing and Logic Control Functions; Built-In Fault Detection and Diagnostic Interfaces; Compatibility with Semiconductor Industry Communication Protocols; Anti-Static and EMI Shielding Design; Support for Continuous Long-Term Operation in Cleanroom Environments; Dedicated Test Points for Maintenance and Troubleshooting.
2. Core Performance Specifications (Ta = 25℃, Unless Otherwise Specified)
2.1 Electrical Performance Parameters
Operating Voltage: Dual Power Supply with ±15V DC ±5% and +5V DC ±3% (Regulated Output via Integrated 7815/7915 Voltage Regulators and 3846 PWM Controller); Power Consumption: ≤12W (Under Full Load Operating Conditions); No-Load Power Consumption: ≤3W (Typical Value);
Signal Processing Precision: Analog Signal Resolution ≤12 Bits; Digital Logic Response Time ≤100ns; Output Signal Stability: ±0.1% Drift Per 10℃ Temperature Variation; PWM Output Frequency: 20kHz - 100kHz (Configurable via External Circuitry);
Voltage Test Points: Dedicated Test Points for ±15V, +5V, and Ground (0V) Signals; Diode Test Threshold: Normal Value ≥0.5V (Between Power Pins and Ground); Short-Circuit Detection Threshold: ≤0.3V for Power Circuits;
Isolation Performance: ESD Protection: ±15kV Contact, ±25kV Air (Per IEC 61000-4-2); EMI Filtering: Built-In Power and Signal EMI Filters to Meet Semiconductor Industry Anti-Interference Requirements; Signal Isolation: ≥2kVrms Between Analog and Digital Circuits.
2.2 Interface & Communication Parameters
Signal Interfaces: LVDS Input/Output Ports (Support for RGB Signals, Sync Signals, Clock Signals; Compliance with VESA/JEIDA LVDS Standards); 1x RS-232 Serial Port (For Debugging and Configuration, 115200 bps, 8N1 Configuration); Multiple Analog Input/Output Channels (For Sensor Signals and Actuator Control);
Protocol Support: Compatible with Semiconductor Equipment Communication Protocols, TCP/IP, Modbus TCP; LVDS Format Selection: Configurable via External Resistors (Support for 0V/3.3V/5V Control Signals); Frame Rate Selection: Adaptable to 50Hz/60Hz Input Signals via Dedicated Control Port;
Control Interfaces: Digital Input/Output Ports (Configurable for Fault Alarm and Equipment Control); Gamma Correction Interface (For Analog Signal Calibration); Power Monitoring Ports (Real-Time Voltage and Current Detection);
Diagnostic Functions: Built-In LED Indicators (Power Status, Signal Integrity, Fault Alarms); Support for Cable Diagnostics (Open/Short Circuit Detection); Voltage Drift Monitoring via Dedicated Test Points.
3. Hardware Configuration & Mechanical Parameters
3.1 Hardware Configuration
Cooling System: Passive Convection Cooling (Reinforced Heat Dissipation Design with Aluminum Heat Sink on Voltage Regulators and Power Components); Indicator Lights: Power Indicator (Green), Fault Alarm Indicator (Red), Signal Status Indicator (Yellow);
Protective Functions: Overvoltage Protection (±18V for ±15V Circuits, +6V for +5V Circuits); Overcurrent Protection (2A for Power Circuits); Short-Circuit Protection for Power and Signal Lines; Reverse Polarity Protection for DC Power Input;
Core Components: Industrial-Grade Logic Control Chipset, 7815/7915 Voltage Regulators, 3846 PWM Controller, High-Precision Operational Amplifiers (LM324), Gold-Plated Connectors for Enhanced Durability; Built-In Self-Test (BIST) Function for Hardware Integrity Check During Startup.
3.2 Mechanical & Installation Parameters
Dimensions (W × D × H): 180mm × 120mm × 25mm (7.09 inches × 4.72 inches × 0.98 inches); Mounting Type: Panel-Mount Installation (Compatible with Standard Semiconductor Equipment Control Cabinets);
Weight: ≤0.8kg (Net Weight); Housing Material: Aluminum Alloy Housing with Anti-Corrosion and Anti-Static Coating, Metal Shielding Cover for Signal Circuits; Protection Grade: IP40 (Suitable for Cleanroom and Industrial Control Environments);
Terminal Type: Gold-Plated LVDS Connectors (Anti-Oxidation and Wear Resistance), Locking Serial Port Connectors (Anti-Loose Design); Fixing Method: Anti-Vibration Design to Resist Equipment Vibration (Compliant with IEC 60068-2-6).
1 .Our company specializes in automation industrial control accessories. We have more than 100,000 products.
Including : frequency converter, servo driver, servo motor, data acquisition card, industrial camera, touch screen, circuit board, DCS module, soft starter, industrial computer,encoder... etc
2，We accept PayPal transaction. All products provided 60 days warranty. We can send the goods by fast express to all over world.
3. We can supply the product in brand new or used condition to meet your requirement.The picture and price show on our store is not real, before purchasing, please contact us to provide you with accurate quotation and real pictures.
4. If you can not find the product you need in our store, please contact us .we will check it for you.