-14%

1 PCS new NR-HV04 KEYENCE sensor #LYQ007

Regular price $811.33 Sale price $700.00
40 People are viewing this right now
Add to Wishlist
Add to Compare

1  PCS new NR-HV04 KEYENCE sensor #LYQ007

1 PCS new NR-HV04 KEYENCE sensor #LYQ007

$700.00
Parameter Specification
Model NR-HV04
Type High-speed, high-voltage measurement unit
Input method Insulated single-end input; channels insulated from each other; input channels insulated from other units (PC)
Number of channels 4 ch
Measurement cycle Max. sampling cycle: 1 μs (1 MHz) to 60 s
A/D converting system Successive approximation; simultaneous sampling of all channels
A/D resolution 14 bit
Input frequency band 250 kHz (−3 dB or more)
Input type ±1000 V, ±500 V, ±200 V, ±100 V, ±50 V, ±20 V, ±10 V, ±5 V, ±2 V
Low pass filter PASS, 7 Hz, 500 Hz, 50 kHz (−12 dB/oct)
Maximum input voltage OP-89263 (1:1 probe): 1000 V peak, 700 Vrms, or 700 VDC

OP-89264 (1:1 probe): 300 VDC + AC peak

OP-88998 (10:1 probe): 1000 VDC + AC peak

Direct input: 60 VDC + AC peak
Digital filter Averaging rate: 1 to 128 (auto-selected)
Withstand voltage Input to system bus/earth: 2200 VAC (50/60 Hz) for 1 minute
Connector format Insulated BNC connector
Input impedance 1 MΩ ±1%, approx. 30 pF
Input coupling AC/DC/AC-RMS/DC-RMS
Measurable range ±1000 V: −1000.00 to +1000.00 V

±500 V: −550.00 to +550.00 V

±200 V: −220.00 to +220.00 V

±100 V: −110.000 to +110.000 V

±50 V: −55.000 to +55.000 V

±20 V: −22.000 to +22.000 V

±10 V: −11.0000 to +11.0000 V

±5 V: −5.5000 to +5.5000 V

±2 V: −2.2000 to +2.2000 V
Measurement accuracy ±0.1% of F.S.
Display resolution ±1000 V: 50 mV

±500 V: 20 mV

±200 V: 10 mV

±100 V: 5 mV

±50 V: 2 mV

±20 V: 1 mV

±10 V: 0.5 mV

±5 V: 0.2 mV

±2 V: 0.1 mV
Buffer memory 16M data* (limited by NR-X100W buffer)
Warm up time 30 minutes or more
RMS measurement function - Channels 4 ch
RMS measurement function - Accuracy Sine wave: 20 Hz to 1 kHz, ±0.5% F.S.; 1 to 20 kHz, ±1.5% F.S.; Crest factor ≤4; Response time: 500 ms
Maximum allowable voltage to ground OP-89263/OP-89264: 300 Vrms (CAT II) (measurement & GND terminal)

OP-88998: 700 Vrms (measurement), 300 Vrms (GND)

Direct input: 42.4 Vpeak/30 Vrms (measurement), 30 Vrms (GND), or 60 VDC
Residual noise level 0.01% F.S. (LPF: 500 Hz, digital filter ON); 0.05% F.S. (LPF: PASS)
Calculation function CH1-CH2, CH3-CH4 (single-channel usage unavailable with calculation function)
Common mode noise reduction ratio ≥80 dB (max. 60 Hz DC, typ.)
Power rating - Consumption ≤3 W
Environmental resistance - Insulation resistance 500 VDC, ≥10 MΩ
Ambient temperature 0 to +40°C (32°F to 104°F)
Relative humidity 10 to 85% RH (no condensation)
Weight Approx. 270 g (9.53 oz)
*Max. expansion: 216 ch (54 units via NR-X100W); 24 ch (6 units via NR-500)KEYENCE.

.Our company specializes in automation industrial control accessories. We have more than 100,000 products.  
 Including : frequency converter, servo driver, servo motor,   data acquisition card, industrial camera, touch screen, circuit board, DCS module, soft starter, industrial   computer,encoder... etc
2,We accept PayPal transaction. All products provided 60 days warranty. We can send the goods by fast express to all over world.
 3. We can supply the product in brand new or used condition to meet your requirement.The picture and price show on our store is not real, before purchasing, please    contact us to provide you with accurate quotation and real pictures.
4. If you can not find the product you need in our store, please contact us .we will check it for you.

Recently viewed products