1 PCS used FANUC Circuit Board A16B-2100-0180#LYQ007
1 PCS used FANUC Circuit Board A16B-2100-0180#LYQ007
1 PCS used FANUC Circuit Board A16B-2100-0180#LYQ007
Original Factory Precision Parameters (Model: A16B-2100-0180)
|
Parameter Category
|
Parameter Name
|
Original Factory Precision Specification
|
|
Basic Information
|
Product Model
|
A16B-2100-0180; FANUC Genuine Original Circuit Board, 100% unused and unrefurbished genuine parts, consistent with FANUC's official model coding standards. It belongs to high-precision industrial-grade digital control circuit board, designed for dedicated matching with FANUC CNC systems (mainly compatible with FANUC 0i/18i/21i series), with fixed configuration and full compatibility with designated equipment models.
|
|
Manufacturer Standard
|
Manufactured by FANUC Corporation (Genuine Original Factory, Japan); Compliant with ISO 9001 Quality Certification, CE, RoHS, IEC 61131-2, JIS C 60664 Industrial Standards; Conforms to FANUC Internal Technical Standard and High-Precision Circuit Board Manufacturing Norms, as well as EMC Standards EN 55011 (Emission) and EN 55022 (Immunity), meeting the precision calibration requirements of international industrial control standards.
|
|
|
Core Control & Signal Parameters
|
Board Type
|
Digital CNC Axis Control Circuit Board; Integrated high-performance FANUC proprietary control chip (FANUC PMC Controller), supporting CNC system axis control, I/O signal processing, communication conversion and fault detection; Adopting advanced signal conditioning and optical coupling isolation technology, ensuring stable signal output and anti-interference performance; Equipped with dedicated logic control module, matching FANUC CNC system's control logic, realizing high-precision signal synchronization and axis positioning.
|
|
Control Voltage
|
DC +5V (Main Control Circuit Voltage), DC ±12V (Signal Circuit Voltage); The power supply is generated by the board-mounted voltage stabilization module, with built-in overvoltage and undervoltage protection; Voltage Stability: ±0.3% FS, ensuring consistent control performance and signal transmission accuracy; Power supply ripple: ≤50mVpp, avoiding interference to control signals and axis positioning precision.
|
|
|
Signal Response Time
|
Input Signal Response Time: ≤2.5μs; Output Signal Delay: ≤0.8μs; High-speed signal transmission and processing capability, ensuring accurate synchronization of CNC system control signals and execution components (servo motors), improving the machining precision and response speed of the equipment.
|
|
|
I/O Interface
|
Digital I/O Interface: 24 Inputs / 16 Outputs (Optically Isolated); Input Type: NPN/PNP Selectable (Default: NPN); Output Type: Relay Output (2A/250V AC, 2A/30V DC); Supports hot-swappable I/O expansion, compatible with FANUC I/O Link bus, facilitating system expansion and maintenance; Equipped with dedicated servo signal interface, compatible with FANUC α/β series servo systems.
|
|
|
Protection Functions
|
Integrated comprehensive protection: Overcurrent, Overvoltage, Undervoltage, Overheating, Signal Short Circuit, ESD Protection; Fault Alarm Output: NPN Open Collector (24V DC); Fault Memory: Stores up to 20 sets of recent fault records, convenient for maintenance and troubleshooting; Reverse polarity protection for power input and signal input/output, effectively preventing board damage and ensuring safe operation.
|
|
|
Working Frequency
|
Nominal Working Frequency: 50Hz ~ 60Hz (AC); Control Circuit Working Frequency: 150kHz ~ 250kHz; Adaptable to different power supply environments and control requirements, ensuring stable operation of the circuit board under rated frequency conditions, and supporting high-speed axis control.
|
|
|
Electrical Parameters
|
Power Supply
|
Input Voltage: DC 24V ±10% (Working Voltage); Input Voltage Range: DC 21.6V ~ 26.4V; Power Consumption: ≤10W (Standby), ≤30W (Working); Built-in overvoltage, undervoltage and reverse polarity protection, effectively preventing board damage caused by voltage abnormality; Auxiliary Power Supply: DC 12V ±5% (for signal isolation circuit), ensuring stable operation of the signal processing module.
|
|
Communication Protocol
|
Supports Industrial Fieldbus Protocols: FANUC HSSB (High-Speed Serial Bus), RS-232C, RS-485, Ethernet/IP; Integrated high-speed communication interface for real-time data transmission between CNC system components; Communication Baud Rate: Up to 100Mbps (HSSB), Up to 1Mbps (RS-485); Supports parameter reading/writing and board status monitoring through FANUC System Editor Software, facilitating integration into industrial automation systems.
|
|
|
Insulation & Anti-ESD
|
Insulation Resistance: ≥500MΩ (500V DC); Anti-Electrostatic Discharge (ESD): ±25kV (Air), ±15kV (Contact); Insulation Strength: 3kV AC (1 Minute); Effectively resisting static interference and voltage impact in industrial environments, ensuring stable operation; Anti-ESD performance complies with IEC 61000-4-2 standard.
|
|
|
Signal Isolation
|
All analog and digital signals adopt optical coupling isolation design, Isolation Voltage: ≥3kV AC; Signal Isolation Resistance: ≥200MΩ, effectively isolating external interference between CNC system components, ensuring accurate signal transmission and improving the stability of the control system; Isolation between power supply and signal circuit, further enhancing anti-interference capability.
|
|
|
Environmental & Physical Parameters
|
Operating Environment
|
Operating Temperature: 0℃ ~ 55℃ (32℉ ~ 131℉); Storage Temperature: -30℃ ~ 85℃ (-22℉ ~ 185℉); Operating Humidity: 10% ~ 90% RH (Non-Condensing); Storage Humidity: < 80% RH (Non-Condensing); Cooling Method: Natural Cooling (Matching FANUC CNC System Cabinet Cooling); Suitable for industrial CNC machine tool environments, avoiding use in strong corrosion, strong radiation and high-dust environments.
|
|
Physical Dimensions
|
Length: 170mm × Width: 110mm × Height: 22mm (±0.5mm); Weight: ≤0.45kg (Without Accessories); Housing Material: High-quality FR-4 Flame-Retardant PCB Board, Good Insulation and Heat Dissipation Performance; Installation Method: Cabinet Mounting (Matching FANUC Standard Mounting Holes); Ergonomic design, easy to install and maintain, matching the installation dimensions of FANUC CNC system standard control modules.
|
|
|
Anti-Interference & Durability
|
Electromagnetic Compatibility (EMC): Complies with EN 55011 (Class B) Emission, EN 55022 (Class B) Immunity; Vibration Resistance: 5g (10Hz ~ 500Hz); Shock Resistance: 30g (11ms); Service Life: ≥80,000 Hours (Under Rated Working Conditions); The anti-interference and durability performance meets FANUC's strict product testing standards, suitable for long-term continuous operation in CNC machine tool scenarios; Surface adopts anti-corrosion and anti-oxidation coating, adapting to harsh industrial environments.
|
1 .Our company specializes in automation industrial control accessories. We have more than 100,000 products.
Including : frequency converter, servo driver, servo motor, data acquisition card, industrial camera, touch screen, circuit board, DCS module, soft starter, industrial computer,encoder... etc
2，We accept PayPal transaction. All products provided 60 days warranty. We can send the goods by fast express to all over world.
3. We can supply the product in brand new or used condition to meet your requirement.The picture and price show on our store is not real, before purchasing, please contact us to provide you with accurate quotation and real pictures.
4. If you can not find the product you need in our store, please contact us .we will check it for you.